The connection of gas appliances coupled with power supply takes into account three criteria: reliability, safety for users and equipment, and long service life. For gas water heaters, boilers, convectors or stoves to work without interruptions, a dielectric insert for gas is used - a small polymer insulator mounted in a pipe.
If you decide to independently connect the gas equipment, we recommend installing a dielectric. For what it is needed, what types it is divided into and how it is installed, you can find out from this article.
Purpose of the insulating insert
First, find out why we need an insulating dielectric coupling for gas and how it works.
The main function of a dielectric is to protect equipment from stray currents that can occur in a gas pipeline for various reasons. Is stray current so dangerous and are there any ways to prevent its occurrence?
It occurs in the ground at the moment when an accident occurs on power lines, railways, tram tracks. Due to the difference in the characteristics of the conductors - the earth and the metal structures of the gas lines, the current is transmitted to the gas system.
Where natural gas pipelines run, apartment buildings are traditionally equipped with gas stoves. If the column or stove is improperly installed, stray current can penetrate any apartment building
The actions of illiterate neighbors who are in no hurry to replace faulty wiring or simply ground electrical appliances with pipes or batteries can also be a danger.
Here's what happens if stray currents get to your gas equipment:
- gas appliances, most of the parts of which are made of conductive metal parts, become worthless and themselves become sources of danger;
- if an accidental spark occurs, there is a risk of fire, which becomes thousands of times more dangerous in a gas environment. A fire can cause an explosion, and for an apartment building it is a real disaster;
- stray currents transmitted to household appliances and pipes during a thunderstorm or accident on the power grid can cause serious injury to the user of gas equipment.
In order to maintain their health and foresee any risks, they also use a dielectric coupling on a gas pipe.
One of the advantages of a dielectric is its simple installation. The installation of the insulator can be done with your own hands, but the gas service employees check the tightness of the joints and control
Now the insert of the dielectric insert into the pipe has become mandatory for everyone who installs gas equipment in the house or apartment, while the functions and characteristics of the equipment do not matter.
The installation of insulating inserts is regulated by law - in paragraph 6.4 SP 42-101-2003 it is said that immediately after the shut-off valve, a dielectric should be installed in order to exclude the presence of leakage currents, surge currents and short circuits to the body in the gas pipeline. True, there is a reservation - the function of an insulating insert can be performed by a flexible sleeve that does not conduct electric current.
Types of dielectric cutoffs
In everyday life, two versions of dielectrics for a gas hose or pipe are used: simple bushings resembling liners, and threaded couplings. Consider the differences between the inserts and choose the best solution for self-installation.
Option # 1 - Bushings
We must say right away that you do not need a sleeve to install a gas stove or install a column column, since they have a slightly different purpose. The task is the same - to protect against stray currents.
But they are mounted where there are flange connections and bolts are used. Simply put, bushings are used for electrical insulation of flange fasteners.
In appearance, the bushings for gas equipment can be confused with other insulators - for various equipment: radio-controlled car models, agricultural vehicles, steering columns of cars and other
Dielectric inserts made of polyamide PA-6. They are resistant to external influences and have a long service life.
Technical characteristics of gas bushings:
- frost resistance - can withstand low temperatures up to -60 ° C;
- elasticity and a high degree of abutment to metal elements;
- benzo- and oil resistance at temperatures up to +120 ° С;
- ability to withstand multiple alternating loads.
Products are marked by diameter in mm, for example, from M 8 to M 24. The manufacturer indicates the diameters of suitable flanges, bolts, washers in special tables. There you can specify the height of the shoulder and the length of the bushings.
Option # 2 - Couplings
Universal insulating inserts for gas pipes are connected by the coupling method, therefore often they are called fitters - couplings.
They differ in the type of thread, diameter, material of manufacture, external design, but they perform the same function - they cut off the currents generated on the gas pipe from the equipment.
Modern gas boilers are equipped with electronics that are powered by electricity. The effect of stray currents can instantly disable the "brains" of the boiler, resulting in costly repairs
The inserts are made in the factory according to GOST or TU. They are produced in special molds automatically, using screw extrusion of two materials: insulating polymer and metal for threaded pipes. Polymer material meets requirements GOST 28157-89.
Products are intended for operation at a working pressure of 0.6 MPa, a critical figure of 1.2 MPa is considered. Operating temperature on average - from -20 ° C to +80 ° C.
By GOST 14202-69 gas inserts belong to group 4 (combustible gases) and are marked in yellow, but products with a black polyamide part can also be found on sale.
The brand name and diameter are also applied to the surface of the insulating element. For domestic use, dielectrics are produced 1/2 ″, 3/4 ″ - DN15, DN20, respectively
It is better to purchase products from well-known brands, rather than Chinese fakes, and choose products based on the following criteria:
- fire safety - threaded metal elements do not burn, and plastic do not support combustion;
- wear resistance and durability - high-quality parts are made of brass and have a 20-year service life;
- suitable specifications - resistance of at least 5 ohms with a sharp increase in voltage to 1000 V.
The best place to install the coupling is between a gas tap and a flexible connection.
The connection method is threaded, made by winding the device onto the pipe. Fittings can have both external and internal threads.
Sample of tap with insulating sleeve. The combination of products from one manufacturer simplifies the installation of the dielectric, making it faster. The device is installed at the end of the pipe, before connecting the hose leading to the stove or boiler
Before buying a dielectric, it is necessary to clarify the diameter of the gas pipe, as well as to choose a flexible eyeliner suitable in size. Sometimes connection hoses are sold with the equipment, so be sure to check the equipment.
The gas insulator is installed for a long time and does not require maintenance, but is constantly under the control of the gas service, which conducts inspections of equipment annually.
The procedure for installing a dielectric on gas
Before any work with gas equipment or highways, it is necessary to turn off the tap to stop the flow of fuel and ensure safety. If before this, a stove, column or boiler was used, it is necessary to leave the burners in working order so that the remaining gas burns out.
Then proceed in order:
- If the flexible eyeliner is already connected to the pipe, carefully twist the nut with the key. The long-installed fasteners are often “sticky”, so for confidence you can use two keys.
- On the free end of the pipe we wind a sealant - a fum tape and carefully tighten the connection first with your hand, and then with a key. Screw the clutch or “barrel” to the limit, trying not to knock down the threads and not deform the dielectric body.
- In the same way, screw the nut of the flexible eyeliner onto the other end.
- We diagnose the connection in a safe way.
Soap solution for checking the tightness of compounds is used not only by users of gas equipment, but also by Gorgaz workers. Diagnosis is simple: apply soap foam with a brush or brush to the joints and observe what happens.
The appearance of bubbles, even small ones, indicates a lack of tightness - the coupling will have to be tightened. If there are no bubbles, the installation is done correctly and you can safely use the equipment.
It is forbidden to use an open flame - matches or lighters to check the gas leak.
Step-by-step instruction:
Image Gallery
Photo from
Step # 1 - choosing a dielectric insert
Step # 2 - preparing the installation site
Step # 3 - attaching the sleeve to the pipe
Step # 4 - connecting the dielectric to the eyeliner
We remind you that it is impossible to use gas equipment before the arrival of a gas service employee. He must verify, record the fact of the installation of the dielectric and give permission for the operation of the connected equipment.
And in the future, all activities for connecting, replacing, repairing gas equipment are carried out together with representatives of the service organization.
As in practice, the dielectric is installed in the tap:
The sequence of connecting the column to the gas pipeline:
Now you know how to correctly and quickly install a dielectric insert for gas on the pipe. The installation procedure can be done independently or by a specialist - in any case, the result will be your safety and serviceability of home gas equipment. If you still do not have a dielectric, we recommend installing it, and at the same time changing the gas hose, whose service life is limited.
If you had to deal with the installation of a dielectric on a gas pipe, please share your experience with visitors to our site. Leave your comments, ask questions to experts and participate in the discussion of the material. The communication unit is located under the article.