Residents of apartment buildings are often interested in how profitable are common house heating meters, the installation of which has recently been mandatory in all regions of Russia.
It is difficult to answer this question unequivocally, since there are several options for calculating the monthly fee for such a service. Let us consider in more detail the existing accrual procedures, taking into account all sorts of nuances.
The need for installation of common house flow meters
The Federal Law of the Russian Federation dated November 23, 2009 No. 261-ФЗ “On energy saving of energy resources and the use of metering devices for used energy resources when calculating for them” indicates the importance of installing common house meters designed to control heat consumption.
According to Law No. 261, management companies can install heat meters without coordination with residents of multi-apartment buildings, charging payments according to the data received
The regulation requires the installation of such devices in all apartment buildings, with the exception of emergency buildings. In addition, it was considered impractical to equip buildings with these devices if the value of the purchase and installation of the flow meter exceeds the amount of heating payments received within six months.
Legislators believe that this Regulation will contribute to the achievement of the following objectives:
- Fair distribution of payment for heat supplied to homes. Homeowners who care about reducing heat loss (for example, those who insulate an apartment or facade) should pay less than those who constantly leak heat through slots or open windows.
- Motivation of residents to respect both residential and communal premises. They should know that the heating fee will automatically increase in the case of an open door or broken windows, not only in the apartment, but also in the entrance.
In addition, Law No. 261 officially transfers to residents the responsibility for communal property. According to this legal act, utilities are no longer responsible for the condition of entrances, basements and attics. All work in public places should be carried out at the expense of the owners of apartments located in the same house.
Varieties of common house heat meters
Various heat instruments are used as heat control devices, which may vary in the way they work, design features, and specifics of maintenance and installation.
Like any measuring device, a common house flow meter is subject to mandatory verification, which, as a rule, is carried out once every 3-4 years. Not only the term of operation, but also the correctness of the instrument readings depends on this procedure
Specialists of an organization engaged in the installation and maintenance of such devices in a city (region) will help to decide on the installation of a particular model. They will talk about the features of the devices, recommend options that work best in local conditions.
They will also advise on equipment (valves, filters, etc.), which should be purchased additionally, and will also give advice on the warranty obligations of the supplier.
Most often, four types of flow meters are used in housing and communal services:
- tachometric (mechanical);
- vortex;
- electromagnetic;
- ultrasound.
Consider the above devices in detail.
Option # 1: Tachometric
Such devices, the system of which includes mechanical rotary or vane devices and heat meters, are considered the most budgetary option, since their cost is much lower than similar devices of other types.
However, in addition to standard equipment, their installation requires an additional magnetic-mechanical filter that protects the device itself and the entire system from pollution.
The tachometer counters are powered by a battery whose resources last for 5-6 years. Due to the lack of sensitive electronics, the device can function reliably for a long time in adverse conditions (for example, in high humidity)
The main disadvantage of this category of models is the inability to use them with low quality coolant (increased rigidity, a large percentage of impurities). In this case, the filter quickly clogs, causing a decrease in the pressure of the coolant. Due to this feature, tachometer counters are usually used only in the private sector.
Option # 2: electromagnetic
The basis of such devices is the well-known property of liquids - the generation of electric current during the passage of magnetic fields. By measuring the volume of water and the inlet / outlet temperature, even currents of very small magnitude can be detected.
Electromagnetic meters are recommended to be installed in houses located in regions with good water quality. Similar machines must also be provided with high-quality maintenance.
Electromagnetic devices are characterized by a high degree of accuracy, but they require high-quality installation and regular maintenance by qualified personnel.
In case of untimely cleaning of the device, they begin to overestimate the readings. The high content of glandular compounds in the liquid and poor-quality wiring also contribute to the big data distortion.
Option # 3: Vortex
When a fluid stream meets an obstacle in the water, turbulences form. The action of mechanisms of this type is based on this principle. Such measuring devices can be installed both on horizontal and vertical sections of communication systems, the main thing is that the device is located on a straight section of the pipeline.
The great advantage of vortex devices is the presence of a radio interface, thanks to which service organizations have the ability to remotely take readings and receive information about malfunctions
The advantages of such meters include low energy consumption (one lithium-ion battery lasts about 5 years). Vortex meters are sensitive to pressure drops, as well as the presence of large impurities, which is why they require additional installation of filters.
At the same time, impurities of metal salts in water, as well as deposits formed in pipes, do not affect the readings of devices.
Option # 4: Ultrasound
Indications of this type of apparatus are based on the passage of an ultrasonic signal through a water stream. The higher the speed of the latter, the longer the wait for a response.
Ultrasonic meters are very sensitive to welding currents. They are also not very durable in conditions of inadequate quality of water used in the system.
Devices of this type show themselves well in new homes, in the pipes of which there is no deposits. However, impurities, pressure drops in the heating system, air bubbles in the water can significantly increase the flow meters of this category.
Before installing the flowmeter, you need to know
All expenses for the acquisition, installation, maintenance of the device are borne by the residents. Owners of non-privatized apartments will be reimbursed by the local municipality for installation costs.
When choosing a company to install a heating meter, you need to find out if it has permits, admissions and certificates, as well as a certificate of state registration
The choice of the organization that will undertake the installation of the device requires special attention. It is advisable that the same company is also involved in meter maintenance, including timely cleaning of filters, routine repairs, and regular inspection of the instrument.
External negative factors
It is also important to consider that many external factors influence the correct operation of flowmeters.
Among them can be called such reasons as:
- The formation of mineral deposits in the pipes, because of which their inner diameter decreases. This causes an increase in flow. Since the measuring devices are designed for a certain size of the elements, a decrease in this indicator will lead to incorrect calculations, and the result will exceed the actual value.
- The presence of impurities in the water. Mechanical impurities and air bubbles cause a significant error of readings, reaching 10%. To clean the liquid, it is recommended to additionally equip the devices with filters that trap foreign particles.
- Precipitation on the parts of the flowmeter. When using mechanical structures, a similar process reduces readings, while in other types of devices it causes a significant (sometimes multiple) excess of the actual values.
- Adverse microclimate of the room where the installation of the measuring device. Dampness, temperature changes are especially reflected in devices with electronic mechanisms.
- Lack of grounding and poor electrical circuits, as a result of which an electrical potential can occur in the pipeline.
- Uneven pressure in the system negatively affects the correctness of the measurements. The same can be said about careless installation of the meter, which can also distort data.
- Coolant temperature. Hot liquid, the temperature of which exceeds the permissible norms, can harm the elements of the meter.
To avoid incorrect readings and extend the life of the device, it is important to regularly carry out qualified maintenance work and check the device.
Ways to save money at home
There are several proven methods that allow you to reduce heating payments generated using common house meters.
Insulation of the facade of the house with mineral wool, polystyrene or other materials will reduce heat transfer to the environment, and therefore reduce heat consumption
The following joint activities will help reduce performance:
- high-quality insulation of the building;
- full glazing of the entrance with the replacement of conventional frames with more durable and thermally insulating metal-plastic products.
Although such events will require a one-time investment of residents, they are beneficial in the long run.
Settlement operations for a common house appliance
Not so long ago, the Government of the Russian Federation adopted Resolution No. 603 of 06/29/2016 in the Russian Federation, where updated rules for calculating heating according to a common-house meter are detailed.
According to this legislative act, the price of heat energy depends on the following factors:
- heat from a heating plant or a small boiler house serving a house (a group of buildings);
- presence / absence of a common house heat meter;
- equipment of apartments with individual flow meters or their absence.
According to paragraph 42.1 of the Calculation Rules No. 354, depending on the decision of the local municipality, the payment for the heat provided can only be charged in the heating season or evenly distributed monthly throughout the year. The adopted legislation considers several options.
Supply of heating to the house with OPU (without individual appliances)
If heat is supplied to a building equipped with communal flow meters, and the apartments do not have individual heat meters, then in case of payment for heat during the heating season, the calculation is made according to the formula:
P = V x (S / Sabout) x Twhere
V is the total amount of heat that is supplied to the building based on the readings of a common house flow meter (in gigacalories);
- S - total area of a separate apartment (in square meters);
- Sabout - total living area of apartments located in the building, m2;
- T - tariff for one gigacalor provided (set by the local administration in agreement with the providers of this service), rubles / Gcal.
If the heat charge is charged evenly throughout the year, a conversion factor K is added to the formula. It is calculated by dividing the number of months of the heating season (7-8) by 12 (the number of months in a year). If the heating period of houses lasts for seven months, then K = 0.58.
Regardless of the calculation scheme, the total amount paid during the year will be approximately the same.
If the installation of the OPU is not possible
In this case, the procedure for charging heat for residents of old houses is considered, where, due to the technological features of the networks, installation of common house metering devices is impossible. In this case, payments are calculated according to the norm of heat energy consumption.
A common house meter alone does not reduce heat energy consumption, but its use motivates residents to consciously relate to this resource.
When calculating payments only in the months of the heating period, the formula is used:
P = S x N x Twhere
- S - total area of housing, m2;
- N is the normative norm of heat consumption, measured in gigacalories per square meter;
- T - 1 Gcal tariff established by the local administration, agreed with the service provider, rubles / Gcal.
If the payment for heat energy is divided into all months of the year, then the conversion factor K = 0.58 should be added to the formula (as in the previous case, it is calculated by dividing 7 months of the heating season by 12 months). Thus, the formula will look like:
P = S x (N x K) x T
As in the previously noted case, the total amount of annual payments will be the same.
Lack of OPU when it can be installed
If the house does not have a common house meter, but there is a technical possibility of installing it, then the following formula is used to calculate the charge during the heating season:
P = S × N × Kpov × Twhere
- S - area of the desired premises (in sq.m);
- N - heat consumption standard (Gcal / sq.m);
- Kpov - increasing coefficient, the value of which varies. In 2016, this figure was 1.4, and from January 1, 2017 it rose to 1.5;
- T is the tariff for thermal energy established in this region (rubles / Gcal).
In the case of monthly heat payment during the year, the resulting number is multiplied by the coefficient K = 0.58 already known to us (for the seven-month heating season).
Calculation of heat with an OPU and individual meters
A similar option is often found in newly rented houses. In this case, the calculation is made according to the formula:
P = (Vand + Vabout x S / Sabout ) x Twhere
Vand - the amount of heat consumed during the estimated period according to the indications of individual flow meters (Gcal);
Vabout - the amount of heat in gigacalories delivered to the residents of the house according to the total meter, with the exception of the amount consumed, which is determined by the formula:
Pi = (Vin + Viodk × Si/ Sabout) × Tt where
- Vn - the amounts of heat consumed during the calculated interval, determined according to the indications of common house devices for the duration of the heating season (Gcal);
- Si - the area of the living room equipped with an individual meter (sq.m);
- Vodk - the amount of electricity according to the indications of individual flow meters installed in apartments;
- Sabout - the total area of residential and office space in the house (square meters);
- Tt - The heat tariff adopted in the area.
In this case, payment is made exclusively during the heat supply season.
Benefits of Using Counters
Common house flow meters can significantly save on heating. The price for heat, calculated according to actual indicators, is on average 30% lower than by standards.
The high cost of a common house heat metering device is reimbursed within three years from the date of installation, since such a device can reduce heat payments by almost a third
In addition, when paying at the established rates, the beginning / end of the heating period is not taken into account: regardless of the specific data, the accrual is made for the whole month.
But the common house meter does not solve all the problems with paying for heating, because in this case you have to pay according to the averaged data to all the apartment owners, regardless of the amount of heat consumed.
Although the cost of an individual heat control device is very significant, it pays off quite quickly, especially if measures are taken to save heat energy
In this case, an individual heat energy meter will help out the tenants, which also allows you to adjust the heat transfer of the radiators.
Calculation of heating standards
When developing the norms of heat consumption, it is taken into account:
- The total heat consumption, which is necessary for heating all rooms during the heating season.
- The total area of heated spaces in the building, as well as buildings connected to the heating system.
- The duration of the heating season (including the incomplete calendar months in which measurements were taken).
- In addition, when making calculations, the average daily temperatures of heated air indoors and cold outside are taken into account without fail (measurements are taken during the heating season).
In the first case, the indicators indicated in the regulatory documents for the provision of public services to the population are taken as the basis. In the second, the average statistical value for the five previous periods of heating is taken into account (data are provided by the regional hydrometeorological service).
An important parameter is also the average maximum temperature, which is calculated by measuring the five most frosty winter days following each other.
Homeowners should be careful about the equipment supplied, since they pay not only for its installation, but also for maintenance and repair of the device
In the temperate zone, central heating services are usually provided for 7-8 months - from September-October to April-May; in the first and last months, fees may apply at a reduced consumption rate.
Approval and Tariff Approval Process
All calculated indicators are compiled by specialists and employees of heat supply organizations. Then they are mandatory approved by the energy commissions operating within a particular locality, region, territory.
Representatives of local authorities and public organizations, as well as deputies of different levels, are also invited to a meeting where the planned prices for heat are considered.
Tariffs are calculated in accordance with legislative acts of the Government of the Russian Federation, which establish consumption standards for utilities, including the amount of heat energy. Heat supply organizations need to confirm and justify the proposed prices for heating services.
Since the actual outdoor temperature during the heating season may not coincide with the calculated standards, once a year utilities are recalculated.
In severe cold weather, consumers will have to pay a certain amount, while in mild winters an overpayment is possible, which is counted towards future payments. The same procedure is carried out once a year in homes where flow meters are not provided.
The video presented presents the opinion of a specialist regarding the benefits that are provided by common house heat meters.
A common house meter is a useful device that can significantly reduce very large heating costs. Despite the high cost, the funds for its installation quickly pay off, especially with the conscious interaction of residents taking joint measures to reduce heat consumption.
Please write comments in the block below. Tell us about your experience in using common house meters and in performing calculations based on readings taken from them. Share information that will be useful to visitors to the site, publish photos, ask questions.