The kitchen faucet is an actively operated appliance. He keeps the water closed, in the open - mixes a cold stream with a hot one, sets the pressure. These factors, together with improper handling, contribute to rapid wear. Therefore, when choosing, it is necessary to take into account not only the appearance, but also the reliability of the product, agree.
In order to purchase a reliable product, you need to know the device of the kitchen mixer. In addition, this information will help you understand how complicated or simple the repair will be. Will the owner be able to cope with malfunctions on his own or will a plumber call?
You will learn all about the design features of kitchen faucets from our article. We have described in detail the varieties presented to the consumer by the market. For a clear perception of the information attached schemes, selections of photos and video repair instructions.
Division by materials of manufacture
The name "mixer" directly indicates the main function of this plumbing equipment - mixing water. The device is connected to cold and hot water pipes, and its task is to supply water in the right proportion.
Adjustment is carried out manually by the user. In addition to temperature correction, the mixer also adjusts the pressure of the water stream.
Mixer - a device that combines two taps in a single housing, connected by separate pipes to the pipelines of the HVS and GVS
Materials used in production
A modern kitchen faucet can be made of the following materials:
- metal alloys (bronze, brass, silumin);
- polymers;
- ceramics.
A metal faucet is the most popular option for use in the kitchen. Brass and bronze are not oxidized and do not corrode from regular contact with water. In addition, these materials are chemically neutral, which means that deposits of mineral salts do not occur on their surface.
Image Gallery
Photo from
A set of materials is used in the manufacture of faucets for installation in the kitchen. Hard metal alloys and polymer compounds predominate; elastomers are used
The vast majority of mixer models are made of steel alloys alloyed with components that protect the device from rust and increase resistance to mechanical stress
Limited edition models of ferrous steel alloys. Aesthetic indicators, resistance to oxidation and rust are increased by applying a decorative protective shell
Mixers made of brass are more expensive than steel counterparts, but significantly more resistant to external chemical, mechanical, biological negatives
Faucets made of copper naturally cost significantly more than steel models. Manufacturers strive to cover the difference with the original design. When connecting a copper faucet to a steel water line, you must use adapters
Topping the list of expensive appliances are bronze mixers. This is truly an elite fixture for luxurious interior design.
Ceramics are often used in the manufacture of mixer body parts. It is pleasant to the touch, inert to chemistry and bacteria, easy to clean, but not happy with durability
The most affordable option is a silumin faucet. However, its future owner will soon have to purchase the next device
Stainless Steel Kitchen Faucets
Inexpensive metal faucet in the kitchen
Stylish cast iron model with a coating
Brass single lever mixer
Original copper stop valves
Elite Bronze Faucets
Ceramic parts of the plumbing device
Cheap silumin device
Plumbing devices made of metal are widely used due to good performance and their durability.
Silumin mixers - an alloy of aluminum and silicon - are considered less reliable. As a rule, inexpensive models of Chinese or Turkish production are made from this material. Due to the low cost, this alloy has become very popular in the market of sanitary products.
The glossy coating hides the yellow metal - this is brass, an alloy of zinc and copper with high corrosion resistance
Cranes made of polymers are cheaper and easier to manufacture than metal models. They also do not react with water and do not suffer from its mineral composition. In addition, the low thermal conductivity of plastic makes it possible to use it at relatively high temperatures of water.
The main disadvantage of this material is its fragility, which is why polymers are less often used for the manufacture of critical parts of the mixer, using them mainly for the production of flywheels and control levers.
Ceramics is a time-tested material that is now successfully used for the manufacture of mixers. In modern cranes use metal alloys, for example, cermets.
As for their chemical properties, you will not see any manifestations of corrosion or salt deposits, however, according to physical criteria, the devices have a number of drawbacks.
The white ceramic faucet in the kitchen fits well into the cold Scandinavian interior, combines with the facade of the kitchen and a glass “apron”
It is very difficult to make the mixer completely out of ceramic, therefore it is used in combination with other materials, in particular with brass. The ceramics are fragile, and the cermet element can crack not only from mechanical stress, but also from an elementary sharp temperature drop.
Types of coating - protection and aesthetic side
The materials from which the basic structural elements of the mixer are made affect its operation, and the attractive appearance and protection of the body are provided with a coating.
Modern manufacturers cover kitchen plumbing equipment in the following ways:
- PVD;
- chromium;
- bronze;
- nickel;
- enamel;
- powder paint.
The most prestigious and expensive option is PVD - vacuum spraying. This type of coating guarantees a long service life even in the most extreme operating conditions. The strength of PVD is comparable to the strength of sapphire, so in a domestic environment no scratches or abrasions to the mixer are scary.
If the manufacturer calls the plumbing fixture matte or denotes it as “stainless steel”, nickel plating was most likely used, and in the photo - gold plating
Powder coating is also a long-lasting, aesthetic and expensive option. It is used in the decoration of premium faucets. Thanks to high temperature processing (about 180 degrees), the paint is very firmly fixed on the product.
The most common type of coating for kitchen faucets is chrome plating. Chrome is an inexpensive and very effective metal for protecting the crane body, which looks very attractive.
Chrome products can be glossy or matte. The only condition is sufficient coating thickness. A layer of chromium less than 6 microns will wear off very soon and does not look aesthetically pleasing.
Classification of mixers by design type
There are two main varieties of kitchen faucets:
- two-valve;
- single lever.
They radically differ in structure and principle of action. The difference can be understood by reading the name. A two-valve tap has two flywheels (valves) for adjusting the pressure and proportions of water, and in a single lever device, both functions are performed by one switch - a lever.
In addition to the above traditional options for kitchen faucets, touch taps are gaining popularity, which automatically supply water when palms are brought to them. Choosing between these options, you must initially know how they are arranged.
Dual valve model device
The two-valve mixer, by and large, consists of two separate taps, combined in one housing and equipped with one spout. Hot and cold water are regulated independently of each other.
Image Gallery
Photo from
Traditional two-valve mixer
Vintage Style Mixer Taps
Valve model with disc heads
Rotary-progressive mixer
The main drawback of this design is that each time you have to re-adjust the position of the flywheels to obtain water of the desired temperature.
One of the most common models of two-valve taps is a herringbone faucet for a kitchen with a high spout (a low spout is preferable for a bathroom)
The design of a two-valve mixer is as follows:
- valve heads (crane boxes);
- valves
- housing;
- spout;
- aerator.
The housing is installed in the hole made in the kitchen sink, and at the junction place a rubber or plastic gasket for sealing. The device of a kitchen two-valve mixer depends on what type of locking elements (faucet-box) is used.
If the valve head mechanism, which locks and regulates the flow of water, includes ceramic disks, then it should not be installed in water pipes without strainers. If the device gets stuck in the gap between the sand grains, it will often have to be disassembled and cleaned.
At the moment, in everyday life, two versions of the device "controls" of such a mixer are used:
- with ground ceramic discs rotating relative to each other within a limited segment;
- with valve heads making rotational-translational or reciprocating movements.
The simplicity and ease of use of the crane, as well as its service life, depends on the type and structure of the crane box.
Water leakage through the valve head of the first embodiment is due to a leaky sealing ring (6), in the second embodiment, the valve gasket (12) is most often abraded
It is possible to eliminate leakage of valve options without special difficulties with your own hands. The predominant number of such failures is due to leaky rubber gaskets, which simply need to be replaced.
The design of the table-top mixer can be divided into two parts: the first is above the sink, the second is below it. Most breakdowns of the top are due to improper or improper installation of seals.
In the lower part of the valve mixing device, the pin mainly drops out of the rod, due to which water flows from the hot pipe to the cold pipe and vice versa.
The structure of the axle boxes based on cermets
The valve head with ceramic discs as a locking mechanism feeds / blocks the flow of water depending on the position of the holes in these plates. When they are combined, water enters. The larger the area of contact, the greater the flow of water. To turn off the water, turn the valve so that the holes do not match.
To imagine how a ceramic-axle-box crane works, look at its design.
The structure of the crane box looks like this:
- housing;
- stock;
- rod lock;
- turn signal;
- top plate;
- bottom plate;
- elastic pad.
A rod is inserted into the brass body by means of a clamp. If everything is done correctly, at the moment of fixation you will hear a characteristic click. A valve is put on the stem. The indicator is responsible for transmitting torque from the valve to the plates.
The turn signal can also be metal, but often the manufacturer saves on this part and it is made of plastic. Of course, metal models are more reliable and stronger.
Externally, the crane axles of this type differ in color. With a blue ring they put on a valve with cold water, and with a red one - with hot
A rubber or plastic gasket is located at the junction of the crane box and mixer body. If it is damaged or does not fit well, water begins to flow from under the valve. The gasket function is a reliable fit of the crane body and mixer body.
Threaded Crane Design
Threaded axle box works on a different principle. Its design is as follows:
- stock;
- fitting;
- valve;
- rubber gasket;
- body.
The principle of operation of such a model of the valve head is that during rotation of the valve, the gasket is pressed or squeezed, respectively, closing or opening the valve. For the progressive movement of the rod on which the gasket is located, a fitting with a thread at the end is responsible.
This is the easiest to understand design, so you can cope with its repair in most cases yourself
The main advantage of this model is the simple replacement of the rubber gasket in case of wear. But the main drawback is the need to perform this operation much more often than we would like. In addition, to use a mixer with such crane-boxes, you will have to turn the valve several turns, which complicates the process of adjusting the water temperature.
Due to the specifics of operation of valve mixers, the most susceptible element of the system is a gasket, which ensures a tight fit of the flow-blocking device to the water supply channel.
Consider the standard option for replacing the valve seal:
Image Gallery
Photo from
Step 1: Removing the Valve Handwheel
Step 2: Removing the locking mechanism from the slot
Step 3: Removing Cracked Rubber Seal
Step 4: Replacing the Damaged Seal
An overview of the best options for kitchen faucets and the rating of products on the market can be found in another popular article on our site.
Single lever mixer
Single lever mixer - a more modern and practical option for the kitchen.
The main advantages of this model:
- ease of operation - can be adjusted with one hand;
- speed of temperature and pressure adjustment - significantly affects the readings of water meters;
The mixer “remembers” the position of the handle for a comfortable temperature.
To understand the principle of operation of a mixer with one handle, you need to understand its structure.
Image Gallery
Photo from
Swivel or single lever mixer
Brass Water Mixer
Mixer with two separate mechanisms
Swivel Spout Model
Single lever mixer elements
The device of a single lever mixer for the kitchen:
- housing;
- shift lever;
- spout;
- cartridge;
- aerator.
Standard mixers of this type mix water by turning the rotary knob in the horizontal plane, and the pressure of the water by moving in the vertical plane. The aerator provides a uniform supply of water at the outlet, due to the mixing of the water stream with air.
The diagram of the crane in disassembled form, on which you can see all the smallest details, including the ball, gaskets and springs
The main functional element is a cartridge, which is an analog of the crane axle box. A locking mechanism of a ball or disk type is placed in a plastic case.
Ball Valve Design
The ball-type cartridge is based on a metal hollow sphere with three holes. Two of them serve for the entrance of water (cold and hot), and the third - for the exit of water of the desired temperature.The ball connects directly to the handle and changes its position with it.
This is what the main character looks like - a smooth stainless steel ball with special holes for water and fasteners
When you turn the holes on the ball can to one degree or another coincide with the holes of the cartridge. In this way, both the pressure and the temperature of the water in the kitchen are regulated. Faucets of this type are now less common. This is due to the complexity of the production of such models, their high cost and frequent failure.
The principle of operation of the disk cartridge
The principle of a ceramic disk cartridge for a lever mixer is the same as that of a ceramic double-valve crane. The base is two ceramic plates, one of which is movable and rotates with a change in the position of the lever.
Cartridge with ceramic discs looks like a single system, all its internal elements are hidden under a plastic barrel
If the holes on the upper and lower disks coincide, the water enters the spout; if not, it overlaps.
The basis of the cartridge is white ceramic discs, characterized by perfect grinding of the surface to ensure the maximum degree of fit
Such ceramic-metal cartridges are most often used in single lever mixers in kitchens.
Regardless of the design features and methods of supplying water, the installation of kitchen faucets, connection to water branches is carried out in the same manner.
Automatic Mixer - Contactless Use
If a single-lever or two-valve mixer is based on pure water mechanics, the automatic crane works thanks to the electronics.
Its device is much more complicated:
- housing;
- sensor;
- thermostat;
- membrane on the spring;
- locking solenoid;
- shielding coil;
- spring core;
- sealing material.
The solenoid is an inductor. A membrane that blocks the flow of water is located at the end of the core.
When the sensor is triggered, voltage is applied to the solenoid, the coil lifts the core, it is drawn into the cavity of the solenoid, thus raising the membrane and opening the way for water. When power is stopped, the opposite happens: the core lowers and the membrane returns to its original position.
On the diagram, you can easily see how the main components are connected together: coils, tip, core, solenoid, membrane, housing
An automatic mixer requires a battery. You can use the connection to the eclectic network by converting current through a transformer, but these are unnecessary installation difficulties. More commonly used batteries or rechargeable batteries. Automation in the kitchen is a good idea.
During cooking, you often have to get your hands dirty, for example, when working with dough. Turning water on without contact with the valve will help keep the kitchen clean.
The automatic kitchen faucet with touch control is not equipped with the usual levers and valves. The choice of jet pressure and temperature is made by lightly touching the right / left side of the housing. In addition to the touch there are models with a mechanical miniature regulator
Additional functionality and features
In addition to design differences, kitchen faucets can be completely different models.
They should have a number of design features that make this faucet ideal for the kitchen, namely:
- high spout;
- the ability to turn;
- direction of the jet to the center of the sink;
- retractable hose.
A high spout will be very useful in the kitchen, as often there is a need to draw water into a high capacity, for example, a bucket or jug. Another condition is that water enters the center of the sink. It is convenient for washing dishes. The tasks in the kitchen can be very different, so it would be nice if the spout of the mixer could be rotated.
A good mixer can be equipped with a dispenser for liquid soap or detergent, an aerator, a flexible hose or other device that extends the functionality
The presence of a retractable hose in the design of the kitchen faucet will make the faucet more practical and mobile. With this innovation, you can easily pick up a bucket of water that stands on the floor or wash large dishes from all sides.
Not a single professional kitchen tap can do without a pull-out spout. In the photo - a dynamic watering can with an extended working area
Some faucets are equipped with additional functionality, for example, the ability to switch a direct jet to the drip mode or the presence of an additional outlet for supplying filtered water.
Features repair faucets in the kitchen
In fact, the internal structure of the mixer is unlikely to be needed until your faucet fails. Then there is an urgent need to disassemble it and look for damage.
And if you prepare in advance and study the disassembly algorithm of the mixer even before a malfunction occurs, you can save time and nerves, being ready for unforeseen situations.
Single lever mixer disassembly
In order to disassemble a single lever mixer and get to its device, you need to follow this simple instruction. First turn off the water supply - turn off the water. To unwind the mixer body, you need to remove the decorative plug (often looks like a round insert of red-blue color).
A decorative plastic insert hides an unaesthetic screw. Some parts of the mixer are specially made removable, to provide access to the main active parts during repair
Behind the plug you will see a screw connecting the lever and the stem. It must be unscrewed with a screwdriver. After that, you can remove the control knob. The next step is to unscrew the snap ring. To do this, use an adjustable or gas wrench.
If the nut does not loosen, you can gently tap the key with a hammer in the direction of travel, this should help
Now you have access to the cartridge, you can get it and replace it if necessary.
After diagnosing or repairing or replacing, you must follow all the steps in the reverse order. In plumbing, it is important not to “pull” threaded connections, but they should not “walk” either.
Image Gallery
Photo from
Step 1: Buy replacement disk cartridges
Step 2: Removing the mixer handle
Step 3: Removing the cartridge from the enclosure
Step 4: Reassembling the Single Lever Mixer
Repair of a mixer with two valves
The two-valve mixer is disassembled according to this scheme:
- As in the first case, turn off the water.
- Remove the plug from the valve that closes the screw. Unscrew it and remove the flywheel that needs repair, or both.
- Under the valve, you will see a nut that secures the axle box. Use a wrench to unscrew it.
- Having access to the crane box, it can be removed and inspected visually. Particular attention is paid to sealing, if damage occurs, deformation of the gasket, it must be replaced without fail.
When the inspection is complete, all parts are assembled in the same order.
Dismantling a crane with two valves with a detailed examination of the device:
The video shows the device and the principle of operation of the cartridge, as well as the assembly process of the mixer:
Understanding the design of the mixer is very important not only when choosing the right model for your kitchen. Plumbing equipment is used regularly and tends to fail. Knowing the design of the tap from the inside, you can detect a malfunction and repair the mixer yourself.
Do you want to share only the well-known secrets of choosing a mixer for installation on a kitchen sink? Have questions, find controversial issues? Please write comments in the block below.